Concrete Flatwork Checklist
Concrete Flatwork Checklist
Quick Summary
Concrete flatwork requires careful planning, proper site preparation, accurate placement, and quality finishing. This checklist helps crews stay organized from layout through curing while documenting key project details. It is useful for concrete contractors, foremen, finishers, project managers, and small subcontractor crews performing slabs, sidewalks, patios, driveways, and similar work.
When to Use This Checklist
- Before concrete flatwork projects begin.
- Prior to concrete placement inspections.
- During sidewalk, driveway, patio, and slab construction.
- Before scheduling concrete deliveries.
- During finishing and curing operations.
- When documenting project quality control.
- Before project closeout and customer walkthroughs.
Before You Start
- Review project plans, dimensions, and specifications.
- Confirm layout and elevations are established.
- Verify site access for equipment and concrete trucks.
- Review weather forecast and placement conditions.
- Confirm crew assignments and work schedule.
- Verify required inspections have been completed if applicable.
- Confirm materials and tools are available on site.
Safety Checks
- Verify crew members are wearing required PPE.
- Identify and mark trip hazards around forms and reinforcement.
- Maintain safe access routes for workers and equipment.
- Inspect power tools and extension cords before use.
- Establish traffic control if work is near vehicles or pedestrians.
- Plan for safe handling of wet concrete and finishing materials.
Tools, Equipment, and Materials
- Concrete forms and stakes.
- Reinforcement materials.
- Grade stakes, string lines, and layout tools.
- Screeds, floats, edgers, and finishing tools.
- Jointing tools or saw-cutting equipment.
- Curing materials and protection supplies.
- Project plans, specifications, and delivery tickets.
Concrete Flatwork Checklist
- Verify layout dimensions and slab boundaries.
- Confirm subgrade is properly graded and compacted.
- Inspect forms for alignment, stability, and elevation.
- Verify reinforcement placement and support.
- Confirm required thickness and slope requirements.
- Inspect work area before concrete placement begins.
- Verify concrete delivery matches project requirements.
- Place concrete evenly throughout the work area.
- Screed concrete to final grade.
- Bull float surface as required.
- Install control joints at required locations.
- Finish surface according to project requirements.
- Inspect edges, corners, and transitions for quality.
- Protect fresh concrete from damage and traffic.
- Apply curing method specified for the project.
- Complete final quality inspection of finished work.
Documentation Needed
- Project plans and specifications.
- Concrete delivery tickets.
- Inspection records.
- Daily work logs.
- Concrete curing records.
- Project photos before, during, and after placement.
Common Mistakes to Avoid
- Placing concrete on poorly prepared subgrade.
- Failing to verify form elevations before placement.
- Allowing reinforcement to shift during the pour.
- Delaying joint installation.
- Beginning finishing operations too early.
- Neglecting proper curing and protection.
End-of-Day / Final Review
- Concrete placement is complete and inspected.
- Required joints have been installed or scheduled for cutting.
- Finished surfaces meet project requirements.
- Curing protection is in place.
- Photos and project records have been completed.
- Work area has been secured and cleaned up.
Checklist Completion
Project / Job Name
Jobsite / Location
Completed By
Role / Title
Completed Date
Completed Time
Signature
Reviewed / Approved By, if needed
Notes / Follow-Up Items
Need another checklist?
Find more free construction checklists at SimplySub.com/checklists.